(Full papers could be downloaded here)
N. Noraphaiphipaksa, A. Manonukul, C. Kanchanomai, and Y. Mutoh, “Fretting fatigue behavior of metal injection molded stainless steel MIM 316L with small pores and low porosity”, Tribology International, Volume 193, 2024, Article number 109332.
A. Muttamara, J. Sommanat, C. Kanchanomai, and E. Viyanit, “Comparative fatigue performance of decarburized surfaces in railway rails”, Materials, Volume 17, Issue 2, 2024, Article number 17020290.
P. Seenuan, N. Noraphaiphipaksa, and C. Kanchanomai, “Stress intensity factors for pressurized pipes with an internal crack: the prediction model based on an artificial neural network”, Applied Sciences, Volume 13, Issue 20, 2023, Article number 11446.
K. Thadsoongnoen, A. Hasap, N. Noraphaiphipaksa, and C. Kanchanomai, “Numerical investigation of residual stress formation mechanisms in flash-butt welded rail”, Metals, Volume 13, Issue 8, 2023, Article number 1359.
N. Noraphaiphipaksa, S. Katepun, T. Waitayawinyu, and C. Kanchanomai, “Practical method to evaluate the stiffness of fractured radius”, Methods and Protocols, Volume 6, Issue 3, 2023, Article number 56.
J. Kasivitamnuay, P. Seenuan, N. Noraphaiphipaksa, and C. Kanchanomai, “Effect of thickness eccentricity on the stress intensity factors for a pipe with a single internal radial crack under internal pressure”, Engineering Journal, Volume 27, Issue 3, 2023, Pages 25–35.
C. Luangarpa, C. Kanchanomai, and H. Koguchi, “Singularities at interface corners of piezoelectric-brass unimorphs”, Journal of the Mechanical Behavior of Materials, Volume 31, 2022, Pages 755–766.
N. Noraphaiphipaksa, R. Borrisutthekul, and C. Kanchanomai, “Effect of malaligned knee prosthesis on stress and fatigue life of tibial tray”, Engineering Failure Analysis, Volume 137, 2022, Article number 106252.
K. Sukcharoen, N. Noraphaiphipaksa, A. Hasap, and C. Kanchanomai, “Experimental and numerical evaluations of localized stress relaxation for vulcanized rubber”, Polymers, Volume 14, Issue 5, 2022, Article number 873..
J. Wongsa-Ngam, N. Noraphaiphipaksa, C. Kanchanomai, and T.G. Langdon, “Numerical investigation of plastic strain homogeneity during equal-channel angular pressing of a Cu-Zr alloy”, Crystals, Volume 11, Issue 12, 2021, Article number 1505.
N. Taweejun, T. Praditja, S. Bootchai, and C. Kanchanomai, “Effect of multi-cycle nitrocarburizing on the microstructure and surface hardness of low-carbon steel”, Metal Science and Heat Treatment, Volume 63, Issue 7-8, 2021, Pages 380-387.
S. Bootchai, N. Noraphaiphipaksa, N. Taweejun, A. Manonukul, and C. Kanchanomai, “Determination of localized stress–strain behavior of fused silica: Inverse numerical analysis from nanoindentation test”, Journal of Materials: Design and Applications, Volume 235, Issue 2, 2021, Pages 456–466.
A. Hasap, N. Noraphaiphipaksa, and C. Kanchanomai, “Influence of malposition on the performance of elastic rail clip: Toe load, stress, and friction”, Structures, Volume 28, 2020, Pages 2661–2670.
N. Noraphaiphipaksa, P. Poapongsakorn, A. Hasap, and C. Kanchanomai, “Failure analysis of pressure vessel with sight ports using finite element analysis”, Engineering Failure Analysis, Volume 117, 2020, Article number 104791.
S. Bootchai, N. Taweejun, A. Manonukul, and C. Kanchanomai, “Metal injection molded titanium: Mechanical properties of debinded powder and sintered metal”, Journal of Materials Engineering and Performance, Volume 29, Issue 7, 2020, Pages 4559-4568.
P. Poapongsakorn, A. Wiangkham, P. Aengchuan, N. Noraphaiphipaksa, and C. Kanchanomai, “Time-dependent fracture of epoxy resin under mixed-mode I/III loading”, Theoretical and Applied Fracture Mechanics, Volume 106, 2020, Article number 102445.
W. Sochu, N. Noraphaiphipaksa, A. Manonukul, and C. Kanchanomai, “Determination of crack-tip opening displacement in T-type wedge opening loaded specimen”, Experimental Mechanics, Volume 60, Issue 2, 2020, Pages 145–152.
A. Hasap, P. Paitekul, N. Noraphaiphipaksa, and C. Kanchanomai, “Analysis of the fatigue performance of elastic rail clip”, Engineering Failure Analysis, Volume 92, Issue 10, 2018, Pages 195–204.
W. Sochu, N. Noraphaiphipaksa, A. Manonukul, and C. Kanchanomai, “Elastic-plastic fracture mechanics approach for stress corrosion cracking of nickel aluminium bronze under ammonia-containing artificial seawater”, International Journal of Damage Mechanics, Volume 27, Issue 5, 2018, Pages 729–753..
A. Hasap, P. Paitekul, N. Noraphaiphipaksa, and C. Kanchanomai, “Influence of toe load on fatigue failure of elastic rail clip”, Journal of Rail and Rapid Transit, Volume 232, Issue 4, 2018, Pages 1078-1087.
N. Taweejun, P. Poapongsakorn, and C. Kanchanomai, “Microstructure and mechanical properties of resistance spot welding joints of carbonitrided low-carbon steels”, Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, Volume 48, Issue 2, 2017, Pages 1174-1187.
N. Noraphaiphipaksa, A. Manonukul, and C. Kanchanomai, “Fretting fatigue with cylindrical-on-flat contact: crack nucleation, crack path and fatigue life”, Materials, Volume 10, Issue 2, 2017, Pages 155-176.
N. Noraphaiphipaksa, A. Manonukul, and C. Kanchanomai, “Experimental and numerical investigations to determine the modulus and fracture mechanics of tamarind seed (Tamarindus indica L.)”, Biosystems Engineering, Volume 151, 2016, Pages 17-27.
N. Noraphaiphipaksa, A. Manonukul, C. Kanchanomai, and Y. Mutoh, “Fretting-contact-induced crack opening/closure behaviour in fretting fatigue”, International Journal of Fatigue, Volume 88, 2016, Pages 185-196.
A. Muttamara, and C. Kanchanomai, “Effect of Carbon in the Dielectric Fluid and Workpieces on the Characteristics of Recast Layers Machined by Electrical Discharge Machining”, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Volume 47, Issue 6, 2016, Pages 3248-3255.
N. Taweejun , and C. Kanchanomai, “Effects of carbon and nitrogen on the microstructure and mechanical properties of carbonitrided low-carbon steel”, Journal of Materials Engineering and Performance, Volume 24, Issue 12, 2015, Pages 4853-4862.
A. Hasap, N. Noraphaiphipaksa , and C. Kanchanomai, “Torsional strength and failure of copper alloy brazing joint”, Engineering Failure Analysis, Volume 48, Issue 2, 2015, Pages 174-184.
N. Noraphaiphipaksa, A. Manonukul, C. Kanchanomai, and Y. Mutoh, “Fretting fatigue life prediction of 316L stainless steel based on elastic–plastic fracture mechanics approach”, Tribology International, Volume 78, Issue 10, 2014, Pages 84-93.
A. Hasap, N. Noraphaiphipaksa , and C. Kanchanomai, “Microstructure and strength of copper alloy brazing joint”, Welding Journal, Volume 93, Issue 4, 2014, Pages 116-123..
N. Noraphaiphipaksa, C. Kanchanomai, and Y. Mutoh, “Numerical and experimental investigations on fretting fatigue: relative slip, crack path, and fatigue life”, Engineering Fracture Mechanics, Volume 112-113, 2013, Pages 58-71.
P. Poapongsakorn, and C. Kanchanomai, “Fatigue crack growth behavior and mechanism of closed-cell PVC foam”, Polymer Engineering and Science, Volume 53, Issue 8, 2013, Pages 1719-1727.
C. Kanchanomai, and V. Phiphobmongkol, “Biomechanical evaluation of fractured tibia externally fixed with an LCP”, Journal of Applied Biomechanics, Volume 28, Issue 5, 2012, Pages 587-592.
P. Poapongsakorn, and C. Kanchanomai, “Effects of time and stress state on fracture of closed-cell PVC foam”, Journal of Sandwich Structures and Materials, Volume 14, Issue 5, 2012, Pages 557-571.
C. Kanchanomai, “Time-dependent fracture toughness of fumed silica/epoxy nanocomposites”, Journal of Composite Materials, Volume 46, Issue 16, 2012, Pages 1973-1983.
N. Noraphaiphipaksa, T. Putta, A. Manonukul, and C. Kanchanomai, “Interaction of plastic zone, pores, and stress ratio with fatigue crack growth of sintered stainless steel”, International Journal of Fracture, Volume 176, Issue 1, 2012, Pages 25-38.
C. Kanchanomai, N. Noraphaiphipaksa, and Y. Mutoh, “Wear characteristic of epoxy resin filled with crushed-silica particles”, Composites Part B: Engineering, Volume 42, Issue 6, 2011, Pages 1446-1452.
P. Poapongsakorn, and C. Kanchanomai, “Time-dependent deformation of closed-cell PVC foam”, Journal of Cellular Plastics, Volume 47, Issue 4, 2011, Pages 323-336.
C. Kanchanomai, P. Muanjan, and V. Phiphobmongkol, “Stiffness and endurance of a locking compression plate fixed on fractured femur”, Journal of Applied Biomechanics, Volume 26, Issue 1, 2010, Pages 10-16.
C. Kanchanomai, and A. Thammaruechuc, “Effects of stress ratio on fatigue crack growth of thermoset epoxy resin”, Polymer Degradation and Stability, Volume 94, Issue 10, 2009, Pages 1772-1778..
C. Kanchanomai, B. Saengwichian, and A. Manonukul, “Delamination wear of metal injection moulded 316L stainless steel”, Wear, Volume 267, Issue 9-10, 2009, Pages 1665-1672.
C. Kanchanomai and Y. Mutoh, “Time-dependent fracture mechanics approach to crack growth of solder”, Journal of Solid Mechanics and Materials Engineering, Volume 2, Issue 10, 2008, Pages 1318-1329.
C. Kanchanomai and W. Limtrakarn, “Effect of residual stress on fatigue failure of carbonitrided low-carbon steel”, Journal of Materials Engineering and Performance, Volume 17, Issue 6, 2008, Pages 879-887.
C. Kanchanomai, and S. Rattananon, “Effects of loading rate and thickness on mixed-mode I/II fracture toughness of thermoset epoxy resin”, Journal of Applied Polymer Science, Volume 109, Issue 4, 2008, Pages 2408-2416.
C. Kanchanomai, V. Phiphobmongkol, and P. Muanjan, “Fatigue failure of an orthopedic implant – A locking compression plate”, Engineering Failure Analysis, Volume 15, Issue 5, 2008, Pages 521-530.
C. Kanchanomai and Y. Mutoh, “Fatigue crack initiation and growth in solder alloys”, Fatigue and Fracture of Engineering Materials and Structures, Volume 30, Issue 5, 2007, Pages 443-457.
C. Kanchanomai, S. Rattananon, and M. Soni, “Effects of loading rate on fracture behavior and mechanism of thermoset epoxy resin”, Polymer Testing, Volume 24, Issue 7, 2005, Pages 886-892.
C. Kanchanomai, W. Limtrakarn, and Y. Mutoh, “Fatigue crack growth behavior in Sn-Pb eutectic solder/copper joint under mode I loading”, Mechanics of Materials, Volume 37, Issue 11, 2005, Pages 1166-1174.
C. Kanchanomai and Y. Mutoh, “Effect of temperature on isothermal low cycle fatigue properties of Sn-Ag eutectic solder”, Materials Science and Engineering A, Volume 381, Issue 1-2, 2004, Pages 113-120.
C. Kanchanomai and Y. Mutoh, “Low cycle fatigue prediction model for Pb-Free solder 96.5Sn-3.5Ag”, Journal of Electronic Materials, Volume 33, Issue 4, 2004, Pages 329-333..
C. Kanchanomai and Y. Mutoh, “Temperature effect on low cycle fatigue behavior of Sn-Pb eutectic solder”, Scripta Materialia, Volume 50, Issue 1, 2004, Pages 83-88.
C. Kanchanomai, Y. Miyashita, Y. Mutoh and S.L. Mannan, “Influence of frequency on low cycle fatigue behavior of Sn-Ag eutectic solder”, Materials Science and Engineering A, Volume 345, Issue 1-2, 2003, Pages 90-98.
C. Kanchanomai, Y. Miyashita and Y. Mutoh, Strain-rate effects on low cycle fatigue mechanism of eutectic Sn-Pb solder, International Journal of Fatigue, Volume 24, Issue 9, 2002, Pages 987-993.
C. Kanchanomai, Y. Miyashita and Y. Mutoh, Low cycle fatigue behavior of Sn-Ag, Sn-Ag-Cu and Sn-Ag-Cu-Bi lead-free solders, Journal of Electronic Materials, Volume 31, Issue 5, 2002, Pages 456-465.
C. Kanchanomai, Y. Miyashita and Y. Mutoh, Low cycle fatigue behavior and mechanisms of a eutectic Sn¯Pb solder 63Sn/37Pb, International Journal of Fatigue, Volume 24, Issue 6, 2002, Pages 671-683.
C. Kanchanomai, Y. Miyashita and Y. Mutoh, Low-cycle fatigue behavior and mechanisms of a lead-free solder 96.5Sn/3.5Ag, Journal of Electronic Materials, Volume 31, Issue 2, 2002, Pages 142-151.
C. Kanchanomai, S. Yamamoto, Y. Miyashita, Y. Mutoh and A. J. McEvily, Low cycle fatigue test for solders using non-contact digital image measurement system, International Journal of Fatigue, Volume 24, Issue 1, 2002, Pages 57-67.
C. Kanchanomai, Y. Miyashita, Y. Mutoh and S.L. Mannan, “Low cycle fatigue and fatigue crack growth behavior of Sn-Ag eutectic solder”, Soldering and Surface Mount Technology, Volume 14, Issue 3, 2002, Pages 30-36.
Y. Mutoh, J. Zhao, Y. Miyashita, and C. Kanchanomai, “Fatigue crack growth behavior of lead-containing and lead-free solders”, Soldering and Surface Mount Technology, Volume 14, Issue 3, 2002, Pages 37-45.
ชาวสวน กาญจโนมัย, “ความเสียหายของวัสดุทางวิศวกรรม”, พิมพ์ครั้งที่ 2, ศูนย์หนังสือมหาวิทยาลัยธรรมศาสตร์, 404 หน้า, 2559.